OFF GRID SOLAR INVERTER

1. The GETA-LB-EU series includes multiple power ratings designed for different low-voltage battery systems. Battery voltage varies by model:
Always select the battery according to the voltage requirement of the specific inverter model. Batteries with different nominal voltages are not interchangeable.

Yes. It can operate with solar PV and batteries without continuous utility-grid availability, making it suitable for off-grid homes and areas with unstable grid supply.

Yes. When utility power is unavailable, the inverter can supply connected loads using available solar and battery energy.

The inverter can work with compatible low-voltage battery systems. The battery’s nominal voltage must match the specific GETA model, and its capacity and discharge capability should be selected according to the expected load and backup time.

Choose the inverter according to your maximum load demand, appliance startup requirements, PV system size and required backup time. Battery voltage should also be considered, as different GETA power models use different battery-voltage platforms.

Yes. The system can use available solar energy for battery charging and can also charge the battery from an AC source according to the selected operating settings.

A compatible generator can be used as an AC source where the generator output meets the inverter’s acceptable voltage and frequency requirements. Generator and charging settings should be configured according to the system design.

It depends on the selected inverter model and the appliance’s startup power. Motors and compressors can require significantly more power during startup than during normal operation, so both inverter capacity and battery discharge capability must be considered.

Supported GETA configurations can be connected to the LuxpowerTek monitoring platform with the appropriate communication device, allowing users to view key system operating information remotely.